Love where you live. Sign up for our newsletter

How To Re-Shingle A Roof (and not die)

by on May 6, 2017

I had the ‘opportunity’ to re-roof my garage this summer, and I thought I’d try to save you from some of the trouble I went through. Here’s how to reshingle a roof:

Laying down shingles isn’t really very complicated, as long as you have the right tools and the slope of the roof isn’t too insane. If you’ve got a small area to cover, it’s a reasonable project to take on. But forewarned: it’s hard work. For a smallish garage (about 450 square feet of roof) it took me two full days (and I had help).

Tools you’ll need to fix your roof

  • Nail gun – don’t do it without this, unless you’re unusually dexterous with a hammer. I rented one at my local big-box hardware store for about $50/day.
  • Shingle-cutting blade – it’s basically a box-cutter with a curved blade, but it makes cutting through asphalt a lot easier.
  • Pitchfork (or similar) for removing old shingles

A diagram showing how to build something.

Tips for roofing projects

Make sure you have some extra 2x4s around to use as stops (otherwise you’ll be sliding down the roof with an nail-gun in your hand).

Do this job on a warm day (the shingles are easy to work with), but not too hot (they get wickedly hot in the sun).

Start laying down shingles in the middle of the roof and move out toward the edges (it makes it easier to correct your line if you get off track).

How to reshingle a roof – steps:

  1. Tear off the old shingles and replace any rotted boards. It is possible to roof over the old asphalt, but I don’t think it’s a good idea (and I know what I’m talking about, right? I did it once).
  2. Lay down felt paper and aluminum flashing.
  3. Lay down the shingles and nail them in, making sure the make a straight line.
  4. Don’t fall off the roof or get a nail stuck in your thigh.

That’s pretty much all there is to it. For a more detailed walk-through, check out this article.

Getting started on your project and need supplies? Here’s where you can find a roofing supply store near you.

Leave a comment

Your email address will not be published. Required fields are marked *

1 Comments

  1. At the eaves put dripedge under felt at rakes put dripedge on top of felt at the peak if you have soffit ventilation cut the plywood back a inch on each side and put Ridgevent on so the roof will vent and you get more life out of the shingles.