How do you bend plywood?

Does anyone know how to bend plywood? I can't find any online help for doing this. There are so many neat ideas online that I know I could do myself.
How do you bend plywood?


View/Add Comments (12)


(2000 character limit)

Ryan G on Oct 02, 2012:

You can do a wood lamination with several sheets.  It really depends on the size of the finished piece if this will work

Jim on Feb 01, 2012:

Have a look at www.curvomatic.com as they have the best solution.

josh on Nov 02, 2010:

laminate "wiggle board" together with white glue (not wood glue) and clamped it together to you form work. When dry, apply contact cement to one side of your piece and also apply the contact cement to one side of your finished veneer, ie, walnut, zeabra, oak, then carefully adhere them together. repeat to the other side.

bruceschaller on Jul 30, 2008:

I'd check on amazon. 


I think there is another way to do it too.  You can use thin sheets of wood...like less than 1/8....and you can coat the sides with glue, then clamp it into a form.  This is how eames chairs are made.  They don't bend flat plywood....they buy veneer sheets and glue them together.  This method retains the stregnth of the wood...IKEA has some popular chairs made this way.

jpricemoore on Feb 01, 2007:

Bending/forming wood can be extremely complex... here are some links that may provide you with more info than you'd like:



The articles may not contain exactly what you're looking for, but they have some pretty good info about the basics of bending/forming wood.  You might also find yourself getting lost in some of the other forums.

Good luck.

evrtstudio on Jan 26, 2007:

Here is a great book to learn more if you are interested.  As well as a cool looking book to have on your shelf. 




erika on Jan 24, 2007:

Thanks for all the awesome help! I can't wait to get started!

kidgenius on Jan 24, 2007:

You have a few options.

You can kerf your own boards, bend the board, and nail it to an underlying structure.

You can buy pre-kerfed MDF, bend it and nail it, or put a veneer on it to hold it's shape.

You can build up layers of thinner wood that will bend easily and use a form.  You cut thin strip, about 1/8" to 1/4" inch depending on the amount of bend, glue the pieces, clamp them to a form and let it dry.  When it dries, you will have your wood in whatever shape you want.  Check out the "Woodworks" section of the DIY TV network.  The guy does this quite a bit.

You can use steam to bend pieces, but you can't do very large pieces with it.  Only good for long, thin, straight pieces that you want to bend, like a stair railing.

Or, you can buy bendable plywood.  It has the plys running all in one direction and will bend easily.  Sometimes it's called "wiggle wood" and comes in 3/8" thickness.  Only problem is that you need a way for it to keep its shape.  You can either nail it to an underlying structure, or, you can put it in the shape you want, veneer over it, and have it held in the shape you want.  Then, take it out and the veneer should hold everything in place.

balubalu on Jan 23, 2007:

I've asked a local cabinet maker how this is done after trying (and breaking) to bend some 3mm MDF manually and he handed me some oddment he had lying around of exactly the kerfed MDF that wayfarer describes. 

bruno on Jan 23, 2007:

Another good question for Jpricemoore

wayfarer on Jan 23, 2007:

It really depends on what and where - bending an 8x4 sheet of plywood in half is rather different from making a shaped candle holder.

If there's to be a blind side to the finished article, try kerfing it - narrow parallel grooves across the part to be bent (1/2 to 2/3 the depth).  Hard to do by hand, you'll need a router or circular saw.

You can also buy ready-kerfed flexible mdf these days - not exactly plywood, but with the right covering...

If you're really feeling adventurous, lamination is a possibility - thin sheets glued together, bent and clamped on a former before the glue dries.  In essence, making your own plywood.

Patience and prior practice needed in every case though.  Do ask again if you decide on a project.

AndreaR on Jan 23, 2007:

Steam, metal forms of some sort, and a whole pile of patience. :)

All comments
Comments RSS