Colorful rope dog leads have been all the rage in the pet accessories world lately -- and I am obsessed! But, with prices ranging anywhere from $70 to over $150, they're a little outside most people's "dog stuff" budgets. If you'd still like to get your paws on a stylish leash for your pooch (in whatever color your heart desires) without breaking the bank, give this easy DIY rope leash project a whirl!
I am head-over-heels for the rope leash look. As a visual reference, here are a few awesome shops and brands that make them.
Many of these use traditional nautical splicing and whipping techniques, but today we're going to employ a bit of a shortcut! (If you want to learn how to splice rope, there are tons of video tutorials on YouTube, FYI.) So, are you ready to make your own rope dog leash?
Awesome. Pawesome. Here's what you'll need!
- 2 to 2 1/4 yards 3/8" thick cotton rope
- Fabric Dye
- (2) Rope Clamps
- (1) Snap Hook
- Rubber Mallet
- Large Cooking Pot
The rope clamps and snap hook can be found in the rope section of your local hardware store. Finding 100% cotton rope can be a little tricky, though. I ended up finding the braided style at JoAnn's in the trim section. You can order the 3-strand style from Knot & Rope Supply for pretty cheap. (I happened to have some on hand prior to this project.)
1. Determine about how long you want your leash to be (anywhere from 4-6 feet is pretty standard) and cut it accordingly. Be sure to tape or tie off the ends so your rope doesn't unravel.
2. Soak your rope in some warm water. Meanwhile, prepare your dye according to the instructions on the bottle. You won't need very much! A bottle of RIT Liquid Dye will go a long, long way.
3. Now for the fun part! For an ombré/gradient/dip-dyed effect, quickly dip and remove your rope from the dye. Then, re-dip at different heights/levels, until you're happy with the gradation. Want your rope all one color? Submerge the whole rope in the dye, stirring constantly, until the desired color is reached.
Note: I made two versions of this leash using different kinds of rope and found that the 3-strand variety creates a smoother, more subtle ombré effect.
4. Remove your rope and hang it up (outside or in the garage), dark end at the top, to allow the dye to creep down the rope. You can help it along by squeezing the excess dye/water down the length of the rope.
5. Once you're happy with the way the gradient is looking, rinse the rope in cold water until the water runs clear -- or -- use some RIT Dye Fixative before you rinse out the rope if you want to super-seal the color.
6. Allow the rope to dry thoroughly. This may take up to 24 hours.
7. Now that your rope is dry, it's time to attach the clamps and snap hook. Decide which end you want to place the hook. Feed the end of the rope through the ring then fold the rope over, creating a small loop.
8. Place the clamp on a flat surface with the prongs facing up. Lay the base of the rope loop inside the clamp, between the prongs. With a hammer or rubber mallet, hammer all four prongs securely over the rope.
9. On the other end, fold the rope over to create a 6-7" loop (bigger or smaller depending on how big your hands are and what feels comfortable to you). Then, repeat step 8.
Now, after you've attached the rope clamps, you could call it a day -- you have a perfectly functional leash at this point. (Heck, you could skip the dyeing altogether and just attach the clamps and snap hook and -- BAM -- you'd have a leash.) If you really want to take this project into über-stylish territory, though, you'll want to add some finishing touches and cover those ugly clamps up!
There are multiple ways to cover the clamps: you could wrap them in twine/yarn/string/leather cording/etc. etc. I chose to use up some leftover leather (from this project) and create a sleeve with some colorful stitching. If you'd like to do the same, read on!
Materials for Creating a Leather Clamp Cover:
1. Cut a strip of leather about 2.25" wide, or wide enough to cover the length of the clamp.
2. From this strip, cut two pieces of leather, both about 2.5" long or long enough to wrap around the clamp.
3. Soak one of the leather pieces in warm water until it becomes soft and malleable. Stretch it out a bit then pat dry.
4. Fold the leather over. Take a hammer and your darning needle and create some small stitch guides/holes anywhere from 1/8 to 1/4 inch apart. You only need a few light taps from the hammer, don't go crazy.
5. Lay the leather on a flat surface, then position and place the clamp on top. Cut a length of embroidery floss and tie a knot at the end. Anchor the floss to the rope itself by looping and tying the thread a few times.
6. Stitch the two ends of the leather together with a simple whip stitch, pulling tightly. When you reach the end, anchor the floss to the rope as before. Cut the thread.
7. Repeat steps 3-6 for the other clamp. Allow the leather to dry out completely (it'll tighten up around the clamp as it dries) and you're done!
Now for some pretty, pretty pictures!
And, of course, obligatory photos of my dogs:
Happy leash making!