Love where you live. Sign up for our newsletter

Old Wood Board Gets New Life as a Gorgeous Coat Rack

by on Oct 25, 2017

In partnership with The Home Depot

We’re getting into chilly season here in the Midwest. I’m being lazy about the transition this year – I’ve pulled out all my jackets and coats, but have yet to put away my shorts and sandals (this means my place is a mess with clothing everywhere). Whether you’re part of the four-seasons crew like me, or you just want extra space to hang hats and outerwear, a well-placed coat rack is a thing of organizational beauty. Keep reading to see how we turned an old, worn wood board into this pleasantly rustic DIY coat rack.          

Materials

Materials needed for this DIY coat rack

 

Step

Reclaimed Wood DIY Coat Rack | Step 1

Reclaimed Wood DIY Coat Rack | Step 1

First you’ll want to grab your orbital sander and sandpaper. We’re starting with 80-grit to strip the very rough wood down to a nice, smooth surface. The great thing about the Diablo SandNet Discs are that they last a lot longer than your run-of-the-mill sanding discs, which is a necessity with this DIY coat rack, since there’s so much sanding to do. And if saving money is your thing, you should get these because they can be cleaned and reused! 

Grab the application pad included in the pack, and attach an 80-grit disc.

The Diablo SandNet Discs can be cleaned and reused - talk about a money-saver!

Step

Reclaimed Wood DIY Coat Rack | Step 2

Now it’s time to start sanding! Make sure to wear a respirator mask to protect your lungs from dust, and safety goggles to protect your eyes from any fly-aways. Sand down the face of the board until smooth, leaving the edges of the wood rough and untouched.

Switch to a 150-grit sanding disc, and give the face of the board another pass with the orbital sander.

Step

Reclaimed Wood DIY Coat Rack | Step 3

Reclaimed Wood DIY Coat Rack | Step 3

Wipe any excess dust from the board. Using a rag, apply a thin layer of wax to the sanded portion of the board. Wait until dry, and wipe the board down with a clean rag.

Step

Reclaimed Wood DIY Coat Rack | Step 4

Space your wall hooks evenly across the board, and mark their placement with a pencil (use measuring tape to be exact). Use a drill bit slightly smaller than the diameter of the screws needed to attach the hooks, and drill holes where needed. Screw in the hooks.

Step

To hang your DIY coat rack, you can either install hanging hooks to the back of the board, or drill holes straight through the wood for wall screws. Regardless, use anchors when hanging anything this heavy!


An old, discarded board gets new life as a rustic DIY coat rack

How to make a wall-mounted coat rack from a wooden board

How to make a custom wall-mounted coat rack

How to transform found wood into a gorgeous, rustic wall-mounted coat rack
Share this project on Pinterest!

 


This post was sponsored by The Home Depot, but all opinions are mine alone. We love working with companies that support DIYers, and thank you for supporting the brands that help make Curbly possible! This post contains affiliate links; if you click on them and buy a product, we may get a commission from the sale.

Leave a comment

Your email address will not be published. Required fields are marked *

2 Comments

  1. This coat rack is perfect (in an imperfect way).

    The mix of rustic, repurposed wood plank and modern, clean gold hooks makes this DIY very special. I want one for my house right away!

    How did you come up with this idea? Online inspiration? Or did you already have the board with this project in mind?

    Thanks for sharing, I’ll also be sharing on Twitter 🙂

  2. @Emma Metson Thanks for the sweet words! We had the board and knew we wanted to do something with it. Do you ever start with one idea and end up going in the complete opposite direction? 🙂 That’s what happened with this project. Thanks for leaving us a note!