A vintage mid-century chair is always a great find. Unfortunately, the affordable ones are usually in bad condition, and they get passed up by many buyers because it's intimidating to figure out where or how to fix them. Last winter I bought a mid-century chair at an estate sale for $15, with broken webbing, and worn-out cushions. But the structure of the chair was in excellent condition. If you find one like this, don't pass it up! The webbing much easier to repair than you might suspect. Here's how to do it ...
Don't sweat the small stuff, especially when the 'stuff' is household repairs. Here's a rundown of things you can DIY with handy links to tell you how to do them.
Sometimes we're so busy around the house with the big stuff that we disregard the little stuff. Follow This Old House’s advice to fix the latter to bring harmony home.
If you do any sort of DIY, mechanical, construction, carpentry, or even crafting, you're going to work with screws, and sooner or later, the heads will get stripped. It's annoying, but it's not the end of your project. Here's a couple ideas to salvage your work.
1). Use a manual screwdriver. You can control the speed and friction alot better with a manual screwdriver rather than a powerdrill or driver.
2). Use a screw extractor. These handy...
Two of the horizontal pieces (yellow/pink and green/purple) were not attached, as seen in this photo:
How should I fix this? Epoxy? Industrial Strength Adhesive? Can it be welded or soldered without screwing up the white powder coat?
So, apparently ABC News now has a DIY section. This time 'round they offer some lo-fi solutions to technology related problems. It seems they also got the memo that MacGyver has to be name-dropped at least once....
- Soften the flash on your digital camera
- Dry a wet mobile phone
- Fix a scratchd CD or DVD
- Clean a sticky mobile phone
- Substitute different battery sizes
- Clean a dirty printer cartridge
Our garbage disposal jams at least three or four times a month...partially because my wife tries to overextend it, and partially because it sucks. So last time, I ask the maintance man to show me how to do fix it so they wouldn't have to come so often. He refused, citing some legal ramifications. So I told him no thanks, and that I'd just figure it out myself.
So, I did.
1/4” Allen wrench (hex key)