on May 14, 2017:
It's ironic that Earth Day is referenced in the description of this project. This project is in no way environmentally friendly.
The fumes from melted plastics are considered legacy pollutants. This means that once in the environment they are not broken down into harmless compounds, they stick around and build up in the environment. Once released into the air, they travel all around the globe and usually settle in the ocean, where they accumulate in the bodies of fish, marine mammals, and anything that eats them - like us, for instance. These compounds are highly toxic and are known carcinogens. How do I know? I'm an environmental chemist.
Please don't melt plastic.
on Feb 08, 2013:
No matter what I do, I just cannot seem to do this successfully! I have followed the instructions to the letter (setting to Rayon, keep the iron moving, iron each side evenly for around 15 seconds), but on the first go, the plastic is hot and flattened out, but still very much separated. So I repeat the steps. Still hot and flat, but not fused. I do this several more times, even bumping the heat up one notch...and by the time I actually get the plastic to fuse completely, it's badly shrunken, very wrinkled, and sometimes has holes. Even then, some areas may not even be fused, despite being ironed evenly! I don't know how you people do it.
on Jan 18, 2012:
Love this idea! I have tons of plastic bags I've been trying to decide something creative to do with.
on Feb 05, 2011:
Don't throw away the cut offs, they can be platted or knitted into rope or string, from there made into bags and even handbags again :)
on Jul 13, 2009:
Cool Bag Do it yourself Tutorial!
on May 12, 2009:
Hi just wondering.... i'm able to successfully fuse the pastic together but the part i have trouble with is the sewing... the material is too stiff and it's really hard to turn it right side out once it's sewed together?!?! any suggestions? Thanks
on Apr 25, 2009:
The future brain dead unite,think about it,breathing hot plastic fumes....
on Apr 22, 2009:
This is such a cool idea - definitely going to try it - I've been recycling plastic bags by shredding and knitting them (linked), but it takes forever - I like the fast results of this method.
Sandra @ Pepperberry and Co.
on Apr 21, 2009:
Hi there!I just wanted to let you know that this tutorial has been featured on Pepperberry and Co.'s '9 Crafty Ways to Celebrate Earth Day'. Happy Earth Day!
on Nov 12, 2008:
Slightly concerned about this after seeing a comment about toxic fumes from melting on plastic on the Etsy page. What do you think?
on Jul 23, 2008:
This is so NEAT! I will try it tomorrow. I usually stash away the 'cool' plastic bags in my room and I always feel bad using them up to put my lunch in or something...now I have something useful to do with them.
on Jan 03, 2008:
I don't know how I managed to miss this. They look so cool! I also think this would be an excellent project when you need to occupy a bored and unpleasant teenage girl.
on Dec 08, 2007:
Very interesting. You probably want to stick to one type of plastic, Though most of them (if not all) are theroplastic (can be modified by heating e.g.fused,) different plastics have different melting points (and behaviours when melted!)
Some experimentation is required. By using all bags from a single merchant of course, you will more than likely be using the same type plastic.
Good ventilation is essential! fumes will be annoying at the very least, highly toxic at the worst. Outside is a GREAT idea. (Of course you are now turning some of the plastic into air pollutions....)
The melt point for average commercial low-density polyethylene is typically 105-115 °C.
You may be able to make thicker materials, but at some point you will run into problems because the pressing time will increase as the number of layers increases. Ideally, you would know the plastic, the melting point, and have a press set up at that temperature--like a dry-cleaners press.
Plastic bags also make excellent kite making material, in particular there is a Vietnamese crossed stick kite design that is extremely easy to make and possibly the easiest kite to fly. (I'll try and find instruction for it and post them.)
<a href="http://en.wikipedia.org">TYVEK</a> is a spun flashspun high-density <a href="http://en.wikipedia.org/wiki/Polyethylene">polyethylene</a> fibers. If your bags are polyethelene, most are, it will be a similar, although not as tough material.
<a href="http://en.wikipedia.org/wiki/Plastic_shopping_bag#Composition">Shopping bags are made of</a>
on Nov 10, 2007:
This looks really cool and I can think of fun things to do but BIRD OWNERS DO NOT DO THIS ANYWHERE EXCEPT OUTSIDE AND AWAY FROM ANY WINDOWS! The fumes will kill them. If there are people in the house with ashma then this is definately something that needs to be outside.
on Nov 02, 2007:
As with all these plastic bag crafts, some places - like Ireland - now use biodegradable plastic bags (which in Ireland you have to buy so that there are not too many of them about) and in about 6 months it will be a heap of little fragments. Not sure how this would affect the fusing process, but be aware!
on Sep 27, 2007:
This is definitely one of the ultimate recycling ideas...maybe we need to tell those folks in the cities who city councils that have banned plastic bags that they should start making real stuff like this from plastic bags.
on Sep 27, 2007:
Interesting concept...I wonder if you could fuse the bags together and make something like a tarp or even a drop cloth for painting?
on Sep 20, 2007:
ahh thanks for this, i always wanted a bag like this ;)
on Sep 19, 2007:
ok, I did this this weekend, and a suggestion: DO IT IN THE BACKYARD. I opened a window, and still coughed for 24 hours. The fumes are silent but deadly. Basically, it seems to me, unless I did it wrong, that it makes tyvek. Very cool. Also, there is a topic on some other craft place where a woman suggests using silk taffeta for the top and bottom layer. Made it very easy to peel off. Just don't breathe.