Chris Gardner

Chris Gardner

1104 posts

Comments - Make a Rolling Kitchen Cart From an Old Filing Cabinet

Jody on Jun 03, 2018:

For anyone having a hard time finding an inexpensive top for this, just thrift or scavenge an old wooden/butcher block table top (like on a coffee table or small dining table) We did that for our kitchen island and have been using it for years. Ours came off a dining table that someone had thrown out to the curb for garbage. Cut it to size and you're in business!

Alice A. Crawford on Jul 08, 2017:

I did this... but I caution anyone who tries this to make some adjustments if you plan on putting anything heavy into the file such as pots and pans because the bottom will collapse.

Because the metal is thin and the bottom is hollow, the casters are going to need some additional "beefing" up so that the bottom doesn't cave in. I think you need to attach some wood to the INSIDE of the bottom...or it could be the outside but which ever is easier for you, augment some kind of additional strength to the bottom.
Most HD's sell scrap wood, find a piece (s) that are at least 1 inch thick, you'll need to cut them into whatever sizes you'll need which will be a piece on all on all four sides on the INSIDE BOTTOM. TIP: Make a template from paper before you begin. Turn the file upside down and make a template of where you're boards are going to be placed. You'll need to do some measuring so that they fit inside the bottom of the file because those wheels are going to be attached to the wood. Move your measurements about 3/4" from the outside edge away from where there's a double metal fold. Using your template, transfer the hole placement onto the wood. Now pre-drill the holes in the wood using a smaller drill bit than the size of the bolt you'll be using so that the bolt for the wheel will grab into the wood! Again, using your template, transfer the hole placement onto the file bottom and drill a hole.
TIP: Drill your holes at least a 3/4" from the edge of the file.

Place the wood back inside and proceed to attach the wheels by threading a bolt through the holes in the wheels, through the pre-drilled holes in the metal frame and finally into those pre-drilled holes in the wood on the inside. Now, just screw a nut onto that bolt and you're done!

Hopefully, you've marked all the hole placements correctly so that they all line up and now you have a strong bottom that won't collapse under the weight of those pots and pans etc.

Holly B on Mar 13, 2017:

What does the inside look like ?>

Victoria on Jun 02, 2016:

WOW!!!! You could even turn the bottom drawer into a cooler!! I'm doing this!! Thank you soooo much!

Anonymous on Aug 10, 2015:

I love this!! I am looking for a filing cabinet now! Very good idea, love the color of yours.

mike on Aug 03, 2015:

where did you find a cutting board so big?

Chad Pfeffer on Aug 01, 2015:

What a really cool idea for an outdoor cart. You can load it up indoors and wheel is outside to cook with. Love it!

Anonymous on May 10, 2015:

I made mine and it turned out fantastic! I bought a rack from Target for one side to store cookbooks on. It also came with hooks to hang things in as well! I am using mine as storage for my pots & pans

Anonymous on Nov 08, 2014:

If you have two file cabinets, you could span them with a stone or wood slab of the appropriate size.  Could use it as another counter or desk, pushed against wall, or, if you put the wheels on it, could make a moveable kitchen island.  Add open shelves beneath to put baskets for extra storage.

warpsly bearstern on Feb 22, 2014:

can someone who has made this give me an idea of how much weight the drawer bottoms can hold?

Randi on Jun 16, 2013:

I've been eyeing one of these at Target. Looking forward to doing this in the upcoming weeks. Great idea!

Cory on May 16, 2013:

Have you ever though about using a cup drawer pull to cover up the upper portion of the filing cabinents pull insert? I think that would dress it up a lot and make the front appear to not be a filing cabinent at all except for the key lock. Do you think that a standard size cup pull handle would be wide enough to work on the filing cabinents? If it isn't long enough the upper edge would still show. 

Mary on Dec 27, 2012:

I am having the most difficult time finding a cutting board that doesn't cost a fortune. Does any one have any suggestions as to where to get an extra large board that would fit? The top of my cabinet is 16"x27"....

Cindy on Aug 27, 2012:

love this! I think the big deep drawers may be useful for storing small appliances and their accompanying accessories- ie. food processor and multiple blades & bowls. I must make one for that purpose. Also, bulky, non-stacking items like ice cube trays, popsicle moulds and my burger patty stacker (I know, goofy, but it makes perfect burgers). I stash these all in a basket under my island but the filing cabinet would be perfect.

Cookie on Jul 22, 2012:

Made mine today.

Anonymous on May 10, 2012:

The drawers would be great for storing cookbooks if you don't already have a shelf!

LaDonna on Mar 30, 2012:

I love this idea but I'm going to put it in our bathroom in our cabin, minus the butcher block top.  I'm gonna us the towel rack for toilet paper and store extra in the drawers.

Marty13 on Jan 31, 2012:

This is great - I just made one... even copied your color choice (and sprayed my friends patio blue in the process).  My question is:  Will hanging metal implements from the rails chip the spray paint off?  I could stick to wooden and towels, but I thought you might know - thx.

Kira =] on Jan 07, 2012:

Very cute & simple! However, i'd be interested in how to organize the inside of the drawers.  While I'm very tempted to make this, I just see the drawers as being a frustrating mess without organization. Any suggestions?

Jeanne on Sep 12, 2011:

Love this!! If you don't mind I am going to put this on my blog as a great idea. Thank you

luvslimon on Sep 08, 2011:

Hey lemon in half really sells this... not sure why but it does

KarieAnn on Sep 08, 2011:

I saw the link to this on and the timing could'nt have been better.  This is fantastic!  I will be doing thr project some time during the winter months.  I've already got two metal filing cabinents, the casters, and the tools.  All I need is the paint and towel rack!  (I knew those items were in the garage for a reason.) 

Ashley on Sep 08, 2011:

This is such an amazing tutorial. I reposted it on my blog. I love it.

Ryan on Sep 08, 2011:

Wow, awesome! Totally gonna do this soon :)

beate on Sep 08, 2011:

wow! I love this idea!

Add Your Comment!

(2000 character limit)