This tutorial will guide you through all the steps to making your own, large scale DIY concrete planters at home.
This summer, we moved into a new studio space on a bustling avenue that cuts right through the heart of St. Paul and Minneapolis. We love it; our huge floor-to-ceiling-windows look out into the sun-filled street and sidewalks where we can watch the light-rail trains go rolling by. But the people looking back at us don't have as much to look at; our storefront is still looking a little shabby and unloved. So we decided to start out office transformation from the outside in: with a few large-scale DIY concrete planters.
Ahh... concrete. It's kind of a miracle substance. Look around, and you'll start to notice that practically everything is made of concrete. It's strong, durable, infinitely moldable, easy to work with, and looks oh so sharp!
For this project, we wanted to build some planters that were large and impressive. They're going to go out on the street in front of our office, where lots of people will see them. And we didn't want to just go to the big box hardware store and buy a few faux Tuscan jobs; where's the fun in that?! This is a DIY site, and it wouldn't do to have some generic store-bought planters sitting in front of our HQ.
So we came up with the idea of using concrete footing tubes ... you know, those cardboard concrete tube forms you can use to make fence post footings? They're perfect because they come in lots of sizes, and are easy to cut down to length. They make perfect concrete planter molds. We went with a basic cylinder-shaped planter; simple but stylish. Here's how we did it:
- 3 - 80-lb. bags of Quikrete® Countertop Mix
- 3 Quikrete Quik-tube® building forms (16", 12" and 8" diameters)
- 2 PVC drain caps (2" diameter)
- 3 sheets of corrugated plastic, smooth-top
- Non-stick cooking spray
- Duct tape
- Silicone caulk
- 1 length 2" PVC (we actually didn't end up needing this)
- 1 roll of wire mesh
- Plastic garbage bag or sheeting
- A large concrete mixing tray
- A shovel (for mixing)
- Caulking gun
- A utility knife (or circular saw, optional)
- A tape measure
How to Make Your Own DIY Concrete Planters
Decide how tall you want your planter to be. We made our first one 24" tall. Then mark that on the tube (in our case, I started with the 12" diameter tube), and cut the tube at that length. You can use a sharp utility knife, or, to go faster, use a circular saw to carefully make the cut.
To make the inside part of the form, mark your smaller tube at a length 1.75" shorter than the first (this will account for the height of the PVC drain cap and also makes up the base of the planter. For example:
Now place the smaller tube (the one that will end up inside the larger one) on your plastic sheet and trace it. Then cut out that circle with a utility knife. This will be the base of the smaller tube.
Tape the plastic circle you just cut out to the bottom of the smaller tube, taping it neatly all the way around so that it won't let concrete through. Then wrap the whole cylinder in plastic, taping it on. This isn't strictly necessary, but it'll make the form easier to pull away from the concrete later.
Now place the PVC drain cap in the center of the cylinder's plastic 'lid', and screw it in place. Now your interior form is ready to go.
Place the smaller tube on top of a clean sheet of the corrugated plastic, with the 'cap' side up. You'll adhere it to the plastic using the silicone caulk.
Don't do this!
Believe it or not, we often make mistakes when doing DIY projects! Here's something we tried that you shouldn't: putting a wire mesh into the mold.
I thought this would add strength to the planter. It probably would've, but it also made it really hard to get the concrete distributed evenly within the mold, and, honestly, it's a planter ... it's not like anyone's going to be standing on it. So, if I were you, I'd leave the wire mesh out ... the planters will be plenty strong without it.
Here's how the whole mold comes together:
After spraying the interior tube with cooking spray, set the outside tube down around it and adhere it to the base with silicone caulk. Once the caulk has dried, your form is ready for concrete.
Open a bag of Quikrete and mix it according to the directions on the back! I can't stress this enough; unless you're an expert concrete-mixer-guy/gal, just swallow your pride and follow the directions. Things will turn out much better. For a project like this, where a nice, even, smooth finish is most important, you want the concrete to be pretty wet (wetter even than it looks in my photos below). A wetter mix will flow into the form better and give a smoother, more even surface finish.
Fill the form all the way to the top, making sure to pack the material in well (you can use a dowel to make sure it all gets in there).
At this point, you'll want to vibrate the form with a rubber mallet, an orbital sander, or even a reciprocating saw (with the blade taken out). Vibration helps the concrete compact, eliminating air bubbles in within the mix.
The 'top' here will actually be the base of the planter. Smooth it out with a trowel or rubber concrete float, making sure not to cover the drain (this face won't be visible, so don't worry about making it too perfect).
After letting your planters dry for 48 hours, take them out of the molds! You can cut the cardboard away with a utility knife, and then the mold should just peel off pretty easily by hand.
We love how our planters turned out. They're crazy heavy, which makes them hard to move around, but perfect for an outdoor, public location. Once we get them into place, we'll be ready to move on to our next office transformation DIY project: custom-printed window signage!
This post was sponsored by Quikrete, but all opinions are mine alone. Thanks for supporting the brands help that make Curbly possible.