...there lives one spunky gal named Princess Leia Gourdgana.
MWT’s office is having a pumpkin carving contest and the Princess here is our entry. Although she was a bit time consuming–she took about 3 hours to make–she wasn’t that difficult. If you’re interested in making a pumpkin Leia of your own, here are some suggestions.
1. First, prime the areas you plan to paint with white glue or Modge Podge. Acrylic craft paint is all you need to paint a pumpkin, but you’ll probably need to put on a few coats.
2. To make a symmetrical face for a template, I like to draw an eye and then fold the paper approximately where a nose would go. I unfold the paper and from the fold, I draw half a mouth, from the center of the philtrum over. Then, I re-fold the paper and hold it up to a light source–a window works perfectly–and then trace the other eye and the other half of the mouth using those I drew earlier as a guide.
3. Leia’s buns are actually two mini pumpkins. MWT drilled holes in Leia’s head and then into the minis. Two 3" pieces of 1/4" doweling are holding them on. (If you don’t have doweling, you could try some toothpicks–minus the hole-drilling, of course.)
4. To keep the cut areas of your pumpkin from drying out, you can slather on a bit of petroleum jelly or brush them with white glue.
5. A princess has to have a gown! To fake mine, I wrapped a white dishcloth around her neck and pinned it together at the back.
First prize in the contest is fifty bucks to our favorite charity, so here’s hoping the Force is with us.