Showing comments » Curbly | DIY Design Community
Comments for post
» All comments

Rss_blue Comments

Showing 1-10 of 11

Boots_low_res_thumb

stinkknits

December 02, 2007
If you can't find paper that's big enough, you can use the colourful bumf or advertising supplements that come in the mail. It's usually already folded in half so it only needs to be 7 inches.
Rosie_2_thumb

DIY Maven

November 28, 2007

awjones...you're welcome! Sorry for the hang up. Maybe this will help.

The strip in 11 is gently pushed back; while you're holding it back, that's when you manipulate the red strip to the right, as indicated. Good luck! And let me know how it goes!

My best, Maven.

Icon_missing_thumb

awjones

November 27, 2007

I saw these in the Hallmark book titled " home for the holiday and loved them. I looked for instructions everywhere and couldnt find them until now. thanks so much...but i need some help in the completion. I am stuck at step 11 and 12. Can you help me? thanks 

 

Ps I am making them for christmas tree ornaments and i am going to try to get my children to help.  

Rosie_2_thumb

DIY Maven

March 16, 2007
Marti--You have made my day. And you're welcome!
Icon_missing_thumb

martimouse

March 16, 2007

My cousins and I made these about 45 years ago and never found the instructions again after they wore out. Thanks for posting the directions.

Marti 

Rosie_2_thumb

DIY Maven

December 26, 2006
Wesabe_pic_thumb

SarahM

December 23, 2006

I tried this as nearly gave up in frustration before I realized that I was doing step 3 wrong: I was weaving the strips over and under each other when I should have been threading them through each other. A close-up that shows what you should be doing there would be helpful.

Now that I've got it down, though, these are fun to make, and they look terrific. Great tree ornaments and very cool bows for wrapping presents! 

Three tips: 1) cut the tips of the strips on the diagonal; makes it easier to thread them through the folds. 2) If you don't have 14" paper around, try a brown paper bag or a newspaper. 3) If you want bigger stars, art paper often comes with a side that's 27.5" long, so you only have to cut in one direction (i.e. 1" strips).

Avatar_thumb

Swankymode

December 21, 2006
Wow! I used to work for The Workbasket -- actually its publishing company, Modern Handcraft. It was my first "real" job straight out of college. I was one of two graphic designers, and I remember the first thing I did on my first day on the job was to lay out a story for The Workbasket. This was before computers and I had to "spec" type for the typesetter. The story was about making lanterns by punching designs in tin cans. My apologies for the confusing directions and mislabeled diagrams, hopefully it was before my time. I remember the editor, Roma, she was a hoot! And she was the editor for decades, 30 - 40 years I think. Sadly, she pased away shortly after the magazine ceased publication in 1996. Ah memories, thanks for the trip down memory lane!
Rosie_2_thumb

DIY Maven

December 20, 2006

Hey fellow Curbliers. I just found a website from which you can order ready-made stars just like these for a buck fifty a piece or 15 bucks for a dozen. Based on how little paper is used, that's a pretty good profit!

http://www.idlewords.com/christmas/

Rosie_2_thumb

DIY Maven

December 20, 2006
Hi Elizabeth! Stiffish ribbon will work for the folded paper stars. I made a few dozen a while back using the smooth satin paper ribbon you can buy at Hallmark. The only issue I had with it was that it was slippery, so I had to sort of hold everything together as I tucked and folded. Also, when I finished, I had to use a little hot glue to keep the stars from slipping apart. Good luck! Let me know how it goes!!
Showing 1-10 of 11