Knot Another No-Sew Pillow Slipcover (The Package Pillow)

Fabric: approximately twice the              Thread
    dimensions of the pillow,
    so about 40" square fabric
    for 20" pillow.

Nice Package

Lightweight cotton works great for this method.  Lay your fabric wrong side up on a large flat surface. The floor works exceptionally well. Place your ugly pillow in the center of the fabric. Fold up one point of the fabric as shown. Draw up the opposite point, folding the point of the fabric under to the middle of the pillow to hide the raw edge. Draw up the opposite points and tie at the center of the pillow. Tuck in the “ears” to hide the raw edges. By the way, lightweight cotton rips well, so you don’t necessarily need a scissors for this slipcover. Read on for an even easier alternative. 

The Scarf Trick

 

Here's a way to use those square scarves we were given by people who don’t know us well enough to know that we don’t wear square scarves. Bundle up and tie your pillow using the same steps as above. In this case, since your scarf’s edges will have finished edges, you can leave the ears of your knot visible. And because your scarf will remain undamaged, you can always use it as intended, if you should become one of those people who wear square scarves.

 

Running Without Scissors

 

For fabric alternatives, try using large kitchen towels or small table cloths. You’ll get the feel of the fabrics (both weight and size) that will work best.

Stating the Obvious

If the knot falls at the wrong place–say up your nose or in your ear–while you're taking your afternoon nap, turn the pillow over.

November 29, 2006

1 comment  |  8249 views  | 

1

DIY Maven's blog (2085 posts)

Featured Writer
Subscribe to this blog
Member since: 11/07/06
About: Self-proclaimed Maven of DIY, I'm up for anything from gonzo rehab to dressing a room. Check...

More by DIY Maven

• Prev: Lava Rinse Repeat
• Next: Baby's Got Bough