Using curved upholstery needles.
By DIY Maven
If you’ve ever covered a piece of foam over a plywood seat hospital-corner-style, you’ve probably ended up with corners looking something like this. Oh, sure, it looks better than the original fabric, but the gaping fold suggests a DIY job.
Using curved upholstery needles to do a quick slip stitch* to bring the two sides of the fold together creates a much more finished look. Certain fabrics seem to work better at hiding slip stitches than others. I’ve had good luck with chenille–as in this example–and textured micro-fiber suede.
*Slip stitch is done by sliding the threaded needle through the folded edge of the fabric while at the same time picking up a few threads of the fabric opposite the fold. Continue stitching in this manner, making a stitch every 1/8" to 1/4", evenly.
You can find the appropriate thread, generally #18 nylon, and curved upholstery needles at upholstery supply shops as well as good fabric stores, and, of course, on line.
Did you like this article?
DIY Maven's blog (2085 posts)
Featured Writer
Subscribe to this blog
Member since: 11/07/06
About:
Self-proclaimed Maven of DIY, I'm up for anything from gonzo rehab to dressing a room. Check...
melodienelson
DIY Maven
The trick with reupholstery is starting small. This one was really easy: a piece of high density foam on top of a piece of plywood. It was seat of a very old Mission style rocking chair.
baconthecat
Caya123
Add a Comment!