DIY Wooden Candle Holders
By DIY Maven
If you have some leftover scraps from your latest woodworking project, how about using them to make votive candle holders? They’re easy to produce and beautiful when completed, which means you might want to make a few for yourself and some to give as gifts.
Supplies
1. A chunk of wood the size of your choice. Although, a standard votive cup is about ½ inch high, which means you’ll want to use a piece of wood double that thickness, or so. (My hunk is 3.5" wide by 13.75" long by 1.5" thick.)
2. A spade bit the same size as the diameter of your votive cup and a drill. (Experience has taught me that not all votives are the same diameter. Cheap ones--those sold in bags of 25 plus--sometimes have bigger cups. Standard, good quality votives, however, measure 1.5" in diameter.)
3. Votive candles in accompanying tin or plastic cups
Steps
1. Measure and mark the board where you want to place your votive candles.
2. Using drill and spade bit, drill holes as deep as your votives are high.
3. Finish board as desired. I sanded my oak board and applied a fruitwood stain but didn’t bother with polyurethane.
Did you like this article?
DIY Maven's blog (2054 posts)
Featured Writer
Subscribe to this blog
Member since: 11/07/06
About:
Self-proclaimed Maven of DIY, I'm up for anything from gonzo rehab to dressing a room. Check...
baconthecat
StillSubtleDance
DIY Maven
sillygirl
Great idea and looks super cool. What worries me, though, is surrounding fire with wood...
DIY Maven
erika
Add a Comment!